Model |
LX006 |
| CPU |
32bit ARM9, Dual 8bit Microprocessor |
| Memory Module |
Fingerprint Module |
Program Memory |
128KByte ROM |
| Data Memory |
128KByte / 256KByte / 512KByte Flash Memory |
| Controller |
Program Memory |
128KByte ROM |
| Data Memory |
256KByte Flash Memory |
| Fingerprint User |
1,000 / 2,000 / 4,000 Fingerprint Users |
| Fingerprint Templates Size |
808Bytes for 2 or 4Fingerprint Templates |
| ID User |
10,000 Users |
Read Range (125KHz) |
Passive Type |
IDK50 / IMC125 : Up to 2 Inch(5cm) IDC80 / IDC170 : Up to 4 Inch(10cm) |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max.350mA |
| External Reader Port(LX006EX) |
1ea : 26 / 34bit Wiegand, 4 / 8bit Burst for PIN, ABA Track II (Selectable by Software) |
| Communication |
RS232, RS422 / RS485(Max.254ch), TCP/IP |
| Baud Rate |
19,200bps (recommended) / 9,600bps / 38,400bps / 57,600bps (selectable) |
| Input Port |
3ea : External LED Control, External Buzzer Control, Operating Mode(RF / RF + Finger) Control |
| Output Port |
2ea : Error-Output, OK-Output (Open Collector Output) |
| Voice Output |
English, Japanese, Spanish, Portugal, Arabic, Chinese, Korean (Programmable) |
| LED Indicator / Beeper |
3 Array LED Indicators (Red, Green and Yellow) / Piezo Buzzer |
| Operating Temperature |
Fingerprint Module |
-15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) |
| RF Reader |
-35¡Æ to +65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Black, Red, Gray, Silver and Dark Gray / Polycarbonate |
| Weight / Dimension (W x H x T) |
230g(0.51lbs) / 66mm x 129mm x 51mm(2.6" x 5.1" x 2.0") |
| Certification |
FCC, CE, MIC, RoHS |