Model |
FINGER007SRB |
| CPU |
32bit ARM9 and Dual 8bit Microprocessor |
| Memory |
Fingerprint Module |
Program Memory |
1MByte Flash ROM |
| Data Memory |
8MByte SDRAM |
| Controller |
Program Memory |
256KByte ROM |
| Data Memory |
1MByte Flash Memory |
| Fingerprint User |
20,000 Fingerprint Users |
| Event Buffer |
30,000 Event Buffers |
| Frequency |
13.56MHz [MIFARE] |
| Read Range |
ISK50 / IHC80 / IMC135: Up to 2 inch (5cm) |
| ISC80: Up to 4 inch (10cm) |
| Reading Time (Card) |
500ms. |
| Verification Time |
Less than 1sec. |
| Power / Current |
DC 12V / Max.300mA |
| External Reader Port |
1ea (26bit Wiegand, 4 / 8bit Burst for PIN for Anti-passback) |
| Communication |
RS232 / RS422 / RS485 (Max.32ch) |
| TCP/IP(External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps and 38,400bps (selectable) |
| Input Port |
4ea (Exit Button, Door Sensor, Aux#1, Aux#2) |
| Output Port |
2ea (2 FORM-C Replay Output ( COM, NO, NC) / DC12V~18V, Rating Max.2A) |
| 2ea (TTL Output / DC5V, Rating Max.20mA) |
| LCD |
Character LCD (2 Lines x 16 Char) / 2.62¡± x 0.55¡± (65.6mm x 13.8mm) Screen |
| Keypad |
16 Key Numeric Keypad with Back Lighting |
| LED Indicator |
3 Array LED Indicators (Red, Green and Yellow) |
| Beeper |
Piezo Buzzer |
| Operating Temperature |
Fingerprint Module |
-15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) |
| LCD |
0¡Æ to +50¡ÆC (+32¡Æ to +122¡ÆF) |
| Controller |
-15¡Æ to +70¡ÆC (+5¡Æ to +158¡ÆF) |
| RF Reader |
-35¡Æ to + 65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color |
Dark Pearl Gray |
| Material |
Polycarbonate |
| Dimension (W x H x T) |
6.36¡± x 5.28¡± x 1.9¡± (161.5mm x 134mm x 48.5mm) |
| Weight |
547g (1.21lbs) |
| Certification |
UL, FCC, CE, MIC |
.jpg)
